Evoqua Electrodeionization EDI Stack Modules
Ionpure IP-LXM55Z-5 CEDI Module with 9.0–10.0 m³/h Design Flow
1.Product OverviewThe Ionpure IP-LXM55Z-5 is an industrial continuous electrodeionization (CEDI) module designed to produce a continuous flow of high-purity deionized water from RO permeate without chemical regeneration. It is intended for boiler makeup water in power plants, hydrocarbon
1. Product Overview
The Ionpure IP-LXM55Z-5 is an industrial continuous electrodeionization (CEDI) module designed to produce a continuous flow of high-purity deionized water from RO permeate without chemical regeneration. It is intended for boiler makeup water in power plants, hydrocarbon processing, chemical processing, and other high-purity water applications.
2. PRODUCT SPECIFICATIONS
Item | Specification |
Brand | Ionpure |
Model | IP-LXM55Z-5 |
Product type | Continuous electrodeionization (CEDI) module |
Ordering part number | W3T653071 |
Dimension L | 1062 mm (41.81 in) |
Dimension C | 887 mm (34.9 in) |
Shipping weight | 225 kg (496 lb), including shipping crate |
Operating weight | 190 kg (419 lb) |
Compliance | CE marked; wetted materials comply with NSF 14 and NSF 61 requirements |
Manufacturing systems | ISO 9001 and ISO 14000 quality and environmental management systems |
3. OPERATING PARAMETERS
Parameter | Value / Range |
Minimum flow rate | 3.1 m³/h (13.75 gpm) |
Design flow rate | 9.0–10.0 m³/h (40–44 gpm) |
Feed water source | RO permeate |
Feed water conductivity equivalent, including CO₂ and silica | < 40 μS/cm |
Feed water temperature | 5–45°C (41–113°F) |
Inlet pressure | 1.4–6.9 bar (20–100 psig) |
Feed water pH | 4–11 |
Maximum total chlorine, as Cl₂ | < 0.05 ppm |
Iron, as Fe | < 0.01 ppm |
Manganese, as Mn | < 0.01 ppm |
Sulfide, as H₂S | < 0.01 ppm |
Total hardness, as CaCO₃ | < 1.0 ppm |
Dissolved organics, TOC as C | < 0.5 ppm |
Silica, as SiO₂ | < 1.0 ppm |
Typical recovery | 90–95% |
Typical DC voltage | 0–400 V |
Typical DC amperage | 1.0–6.0 A |
Installation environment | Indoor installation with no direct sunlight |
Maximum ambient temperature | 45°C (113°F) |
Recovery, DC voltage, DC amperage, and product resistivity are typical module performance values. Actual performance may vary depending on site-specific operating conditions and can be evaluated using the Ionpure IP-Pro projection software.Actual performance may be determined using the Ionpure IP-Pro projection tool. No separate testing or chemical-cleaning conditions are specified in this product data sheet.
4. Key Features & Benefits
Continuous high-purity water production: Produces a continuous flow of high-purity deionized water without the downtime or chemical regeneration associated with conventional deionization methods.
High design flow capacity: A design flow range of 9.0–10.0 m³/h (40–44 gpm) supports industrial high-purity water system planning.
Typical product water quality: Provides a typical product resistivity of 17 MΩ·cm. Actual performance may be evaluated using the Ionpure IP-Pro projection tool.
Feed water chlorine limit: The specified feed water requirement for total chlorine is ≤ 0.05 ppm as Cl₂, together with the other applicable feed water requirements.
5. Key Applications
Boiler makeup water for power plants
Hydrocarbon processing
Chemical processing
Other high-purity water applications
Send Your Water Treatment Requirement
Tell us the feedwater, required capacity, target water quality and project conditions. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.
- Feedwater source / available analysis
- Design flow or required production capacity
- Target product-water quality or process duty
- Project country, operating conditions and delivery target