LCX-50T Industrial EDI Module 5.8-6.3m³/h Ultra-Large Flow Ultra-Pure Water Equipment Preferred for Heavy Industry
As the ultra-large flow model in the LCX series, the LCX-50T is designed specifically for heavy industries with a daily water consumption exceeding 150 tons, boasting a water production range of 5.8-6.3m³/h. Leveraging mature EDI technology, it redefines the efficiency and stability of large-scale ultra-pure water preparation:
Uninterrupted Mass Water Production: A single unit can produce up to 140 tons of water per day. A new energy industrial park uses 3 units in parallel, easily meeting the 24-hour continuous water demand of 8 battery production lines and completely eliminating peak water supply pressure.
Low Cost Throughout the Lifecycle: Eliminating the need for acid-base regeneration, a chemical giant calculated that compared with traditional mixed beds, annual operation and maintenance costs are reduced by 65%, and the equipment investment can be recovered in 3 years, while hazardous waste disposal is reduced by 90%.
Leading Water Quality Stability: The product water resistivity remains stable at 15-18MΩ·CM, with fluctuations controlled within ±0.3MΩ·CM. After a semiconductor packaging factory adopted it, the chip scrap rate caused by water quality fluctuations dropped from 2.1% to 0.15%.
Flexible Maintenance Without Work Interruption: The modular design supports online maintenance of single membrane stacks. Through intelligent flow distribution, the system's water production only decreases by 12.5% during maintenance. A heavy machinery factory measured that downtime losses are reduced by 800,000 yuan per incident.
| Parameter Item | Specific Value |
|---|
| Flow Range | 5.8-6.3m³/h |
| Operating Current | 2.5A (0-6A adjustable) |
| Operating Voltage | 0-550VDC |
| Maximum Power | 3KW/H |
| Shipping Weight | 155KG |
| Overall Dimensions (H×W×Total Length A) | 605×315×1020mm |
| Left-Right Positioning Center Distance | 215mm |
| Front-Back Positioning Center Distance B | 840mm |
| Fresh Water Interface | 1-1/4″PT Male Thread |
| Concentrated Water Interface | 3/4″PT Male Thread |
| Water Inlet Requirement | RO product water (conductivity ≤5μS/cm) |
| Product Water Quality | ≥15MΩ·CM |
New energy battery industrial parks: Meeting high-purity water needs for power battery and energy storage battery production.
Heavy chemical bases: Supporting continuous production water for large reactor clusters.
Semiconductor wafer factories: Supplying ultra-pure water for 6-12 inch wafer cleaning.
Municipal ultra-pure water stations: Providing centralized water supply for medical and scientific research institutions.
Seawater desalination supporting facilities: Advanced desalination treatment after brackish water desalination.
When your production line faces the dual challenge of "large water consumption and high purity requirements", the LCX-50T stands out as the optimal solution with its triple advantages of "large flow + high stability + low energy consumption". Its standardized interface supports parallel connection of multiple units, which can be flexibly expanded to over 60m³/h, perfectly adapting to the full-cycle needs from existing production capacity to future expansion. It is a strategic equipment for heavy industrial water treatment.
Get Exclusive Solutions
Official website: https://www.fgwater.com
Consultation hotline: +86-13646187144
Email: [email protected]
