FENIGAL-FG Water Technologies
Tel: +86-13646187144 [email protected] Industrial Water Systems · Membranes · EDI · Desalination
FENIGAL-FG Water Technologies Wuxi Fenigal · Industrial Water Division
Translate this website

Google Translate is loaded only when you open this panel, reducing unnecessary requests and layout work during the first page load.

Loading language options…
Request Quote

Product System

Professional Product Detail

Skid-Mounted Brackish Water RO at 8-13 m³/h: A Standardized Solution for Food & Beverage and Mid-Size Manufacturing

Skid-Mounted Brackish Water RO at 8-13 m³/h: A Standardized Solution for Food & Beverage and Mid-Size ManufacturingFor food and beverage plants and mid-size manufacturing sites treating well, tap, or municipal water at TDS ≤2,000 mg/L, the FG-BWRO-824 and FG-BWRO-826 deliver 8-13 m³/h of stab

Category: Product System

Skid-Mounted Brackish Water RO at 8-13 m³/h: A Standardized Solution for Food & Beverage and Mid-Size Manufacturing

For food and beverage plants and mid-size manufacturing sites treating well, tap, or municipal water at TDS ≤2,000 mg/L, the FG-BWRO-824 and FG-BWRO-826 deliver 8-13 m³/h of stable permeate from a compact SS304 skid — pre-engineered, PLC-controlled, and sized for direct installation into existing production floors.

 

Why 8-13 m³/h Is the Practical Middle Ground for Industrial Buyers

Food and beverage facilities and mid-size manufacturers rarely need a full-scale municipal plant, yet a household or light-commercial RO cannot deliver the continuous hourly flow their process demands. The FG-BWRO platform was built around this gap: its 824 and 826 models produce 8 m³/h (≈54,800 GPD) and 12.9 m³/h (≈82,200 GPD) respectively, matching the daily make-up water profile of a single bottling line, an ingredient-water loop, or a boiler feedwater train at a mid-size factory.

The skid-mounted format matters as much as the flow rate. At 0.8 × 2.5 × 1.9 m and 550 kg for the 824, the unit can be positioned inside an existing utility room or retrofitted into a containerized arrangement without major civil work. For procurement teams comparing skid versus container, the distinction is deliberate: a skid-mounted BWRO is an RO-centric packaged system for sites that already have feedwater pretreatment and a suitable enclosure, while a containerized UF+RO plant is a pretreatment-plus-RO integrated plant for high-turbidity or remote sites where civil works and on-site assembly are constraints. The two should not be specified interchangeably.

Rated-Flow Definition and How to Use This Page

The 8 m³/h (FG-BWRO-824) and 12.9 m³/h (FG-BWRO-826) figures in the configuration table are nominal permeate (product-water) flows. The feed-water flow the skid takes in is higher than the permeate flow by the design recovery ratio; a permeate buffer tank and distribution pump are typically added so the RO runs at its optimal duty while meeting peak line demand.

This page is the general selection and configuration reference for the standard 8–13 m³/h skid-mounted BWRO (flow comparison, feedwater limits, standard vs optional scope). Application- and buyer-specific detail is carried on the dedicated pages rather than repeated here, so the pages do not compete for the same search intent.

Page

Primary intent it answers

This page (8–13 m³/h standard skid)

Model selection and configuration: 824 vs 826, feedwater limits, standard vs optional scope.

Food & beverage BWRO page

Hygienic process water: product taste, ingredient/rinse water, SS304 washdown environment.

EPC subcontracting BWRO page

Procurement and delivery: standardised scope, documentation, FAT, import/logistics support.

Containerized UF+RO plant page

Remote / high-turbidity sites needing built-in pretreatment and fast deployment.

Which Model and What Determines It

•  Required daily volume, continuous operating hours, and whether a permeate buffer tank is used decide the choice between the 824, 826, or an intermediate duty.

•  Feed TDS, SDI, hardness, iron and free chlorine decide whether the feedwater meets the standard-skid limits or whether pretreatment / engineering review is required.

•  Membrane element count and operating pressure follow from the measured feedwater, so they are set at quotation, not fixed as a single catalogue value.

What the FG-BWRO Skid Delivers

Verified mechanical and control configuration

The FG-BWRO-824 and 826 are built on SS304 stainless steel frames with corrosion-resistant wetted components. Core components include pressure vessels, high-pressure pump, PLC, and RO membranes. The control interface is a PLC with touch-screen HMI, supporting real-time monitoring and simplified operation.

Verified attribute

FG-BWRO-824

FG-BWRO-826

Nominal permeate flow

8 m³/h / 54,800 GPD

12.9 m³/h / 82,200 GPD

Membrane elements (nominal)

8

12

Power

5 kW (5.5 kW rated)

To be confirmed

Material

SS304 frame

SS304 frame

Control

PLC + touch screen

PLC + touch screen

Footprint (824)

0.8 × 2.5 × 1.9 m

To be confirmed

Weight (824)

550 kg

To be confirmed

Salt rejection

> 97%

> 97%

 

Feedwater requirements that determine a standard-scope site

The FG-BWRO series publishes clear feedwater boundaries. A site qualifies for the standard skid configuration only when the feedwater meets the following verified conditions:

Parameter

Verified limit

SDI (Silt Density Index)

< 3

Turbidity

< 1 NTU

Feed temperature

5-40 °C

pH tolerance

3-11

Iron

< 0.05 mg/L

Maximum free chlorine

0 ppm

Salt rejection

> 97%

 

TDS boundary and application windows

The FG-BWRO series does not publish a single maximum feed TDS figure for the skid line. The defensible standardized scope used on this page is:

• TDS ≤ 2,000 mg/L — the standard application window for the 824/826 skid.

• TDS 3,000-5,000 mg/L — available only after project review; pretreatment, membrane selection, and pump configuration must be confirmed before quotation.

• TDS ≥ 8,000 mg/L — not a standardized capability of the FG-BWRO skid on this page. High-TDS duty requires separate engineering confirmation.

Optional configurations that move a skid from standard to project-specific

Options that can be integrated onto the skid include media filtration and softening for pretreatment, sanitary stainless pressure vessels, remote PLC output (RS232/RS485/Modbus), UV or ozone post-treatment, chemical dosing, CIP skid, VFD, and inline pH/ORP/temperature/residual chlorine instrumentation. These are configuration choices subject to project confirmation, not standard inclusions.

Where 8-13 m³/h Skid-Mounted BWRO Fits

Food and beverage processing

Bottled water production, beverage blending, ingredient water, and rinse water treatment are listed FG-BWRO application sectors. In these processes the buyer's core concern is not simply lower TDS but stable conductivity and a consistent mineral profile from shift to shift, because finished-product taste, shelf stability, and ingredient batching depend on water consistency. An 8-13 m³/h skid sized for continuous make-up water allows the plant to isolate process water from municipal supply variability, provided the feed SDI, turbidity, iron, and chlorine limits above are met.

Boiler feedwater and cooling-tower make-up at mid-size factories

Boiler feedwater purification and cooling tower make-up are listed industrial manufacturing applications. For a mid-size manufacturing site with a packaged boiler or cooling loop, the operational pain point is scale and corrosion driven by hardness and dissolved solids. A skid-mounted BWRO upstream of the boiler or cooling tower reduces the dissolved-solids load and supports more predictable blowdown control. This is an application-fit statement, not a guarantee of a specific boiler-water specification; final suitability depends on the site's existing pretreatment and operating pressure.

Scope and what this page does not claim

This page promotes the FG-BWRO-824/826 skid-mounted BWRO at 8-13 m³/h for TDS ≤2,000 mg/L food and beverage and mid-size manufacturing applications. TDS 3,000-5,000 mg/L is a project-review range and ≥8,000 mg/L is not a standardized capability on this page. No claim is made here regarding certification to a specific food-contact standard, customer cases, project references, or guaranteed delivery lead times; those items must be verified separately in the commercial quotation.

System Configuration: What a Buyer Receives and What Must Be Confirmed

A standard skid-mounted FG-BWRO-824/826 inquiry involves the following configuration logic, separating verified scope from items that need project-specific confirmation.

Configuration layer

Verified / standard scope

Project-specific confirmation needed

RO skid

SS304 frame, pressure vessels, pump, PLC + touch screen, RO membranes

Membrane brand/model, exact element count per feed TDS

Feedwater pretreatment

Not included in base skid; optional media filter / softener available

Whether site feed requires softening, media filtration, or antiscalant dosing based on hardness, iron, and SDI

Post-treatment

Not included in base skid; optional UV / ozone available

Whether food-contact or process-water specification requires UV/ozone

Instrumentation

PLC + touch screen; optional remote output and inline sensors

Whether client SCADA requires Modbus/RS485 and which inline parameters

Enclosure / installation

Skid-mounted open-frame; optional containerized execution

Site ambient conditions, available floor space, and whether a container or acoustic enclosure is required

Feedwater TDS

Standard promotion: ≤2,000 mg/L

3,000-5,000 mg/L requires engineering review; ≥8,000 mg/L is not standardized here

 

638081d8-8743-433f-bd28-9fcb2a21f0dd.png

FAQ: What Engineers and Procurement Teams Ask Before Specifying

Is the FG-BWRO-824 a 10 m³/h system?

The 824 is rated at 8 m³/h (≈54,800 GPD); the 826 is rated at 12.9 m³/h (≈82,200 GPD). A 10 m³/h nominal duty typically falls between these two models, and the correct selection depends on required daily volume, operating hours, and whether a permeate buffer tank is included.

Can this skid treat feedwater at TDS 5,000 mg/L or 8,000 mg/L?

This page promotes ≤2,000 mg/L as the standardized scope. 3,000-5,000 mg/L is treated as a project-review range, and 8,000 mg/L and above is not represented as a standardized FG-BWRO skid capability here. Do not use this page to specify high-TDS duty without engineering confirmation.

What pretreatment is required before the skid?

The published feedwater limits require SDI < 3, turbidity < 1 NTU, iron < 0.05 mg/L, and 0 ppm free chlorine. If the site's feed exceeds these limits, pretreatment such as media filtration, softening, or dechlorination must be included in the system scope. Optional pretreatment integration is available on the skid, but it is not standard.

Is this the same as the containerized UF+RO plant?

No. The FG-UF-RO-C36 is a containerized UF + RO integrated plant rated 36 m³/h, with UF as pretreatment for brackish well water, surface water, or biologically treated effluent. The FG-BWRO skid is an RO-centric packaged system for sites that already meet the feedwater limits. They serve different project boundaries and should not be substituted for one another.

What is the warranty and what documentation is provided?

The product page lists a 1-year warranty and states that a machinery test report and video outgoing inspection are provided. Extended warranty language on core elements appears in the highlights but is not repeated as a contract term on the specification table; confirm the final warranty term in the commercial quotation.

Can the skid be customized for voltage and remote monitoring?

Yes. The platform supports voltage configuration (220 V / 380 V / 110 V as listed), pretreatment integration, and optional remote PLC output (RS232/RS485/Modbus). These are optional configuration choices and must be stated in the RFQ.

Request a Quotation

Send your feedwater analysis and required permeate flow to the FG Water industrial water team. Include TDS, SDI, turbidity, iron, free chlorine, temperature, and daily operating hours. The engineering team will confirm whether the FG-BWRO-824 or 826 fits the standard scope, or whether pretreatment and project-specific configuration are required.

[email protected]   |   FG-BWRO Series product page   |   FG-UF-RO-C36 containerized plant


Project Inquiry · Technical & Commercial

Send Your Water Treatment Requirement

Tell us the feedwater, required capacity, target water quality and project conditions. Your inquiry email will automatically include the page you are viewing so our team can understand the exact product, technology or reference that led to your request.

  • Feedwater source / available analysis
  • Design flow or required production capacity
  • Target product-water quality or process duty
  • Project country, operating conditions and delivery target
Inquiry context Current page details will be attached automatically.